Page 38 - REIMO 2024 EN
P. 38

Campingzelt



                Know How



                                                                              The tent poles:
                                                                              Steel frame Very stable. In the case of a simple
                                                                              design, only painted; galvanizing offers better rust
                                         PE or polyethylene For tent floors or rotting strips.  protection. Important is a very good stiffening of
    The tent skin:                       Long, thin "plastic strands" are woven together and   corner angle tent parts w/ rubber, cords or chains.
                                         laminated on both sides with liquid polyethylene.
                                                                              Color markings or numbering facilitate the structure.
    Synthetic fiber or cotton?           Abrasion and mildew resistant, UV resistant.  Aluminum poles About 50% lighter than steel. For
    Today, modern synthetic fiber fabrics are almost   PVC fabric Extremely heavy, waterproof and hard-  sufficient stability, usually stronger than steel poles.
    exclusively used for travel tents due to their excellent   wearing fabric, sometimes used for tent roofs or   Stowage volume is about the same.
    waterproofness and stability combined with low   sewing strips.           Fiberglass poles Used for modern dome or tunnel
    weight and pack size. Disadvantage is their lower   Cotton Breathable, allows water and air to pass   tents. Manufactured from fibers bonded w/ resin.
    breathability (w/ exception of acrylic fabrics) &   through. Moisture is absorbed, the individual fibers   Highly flexible, elastic and always returns to its
    poorer light resistance, but this is of little   swell and the fabric becomes dense. Cotton usually   original position. Bars of any length can be
    consequence when they are normally used as   only achieves an impermeability of around 300 mm   assembled from individual elements.
    vacation tents. The fabrics can be given a UV   water column. Due to its high weight, sensitivity and  Elastic rope connections facilitate assembly.
    protective coating to increase their lightfastness.   long drying time, it is rarely used.  Extremely durable, heavier than aluminum.
    Nylon taffeta (polyamide) Extremely light and   Polycotton Breathable blended fabric made from   Aluminum poles for high-tech tents Used for
    stable fabric. (Taffeta = English name for taffeta =   polyester and cotton. Lighter and more water-  special high mountain tents. Mostly made of aircraft
    fabric made from chemical threads). The quality is   repellent than pure cotton. But compared to   aluminum, high-strength and very light. Due to the
    stated in threads per square inch (190T=190   polyester, it is considerably heavier and not as   high material costs, they are only worth using where
    threads/thread per square inch). 190T/70D also   waterproof.              particularly low weight or very high strength is
    indicates the fiber strength of 70D. (D = denier,                         required.
    measure of thread strength for man-made fibers).   Acrylic Modern hi-tech synthetic fiber fabric w/   Air hoses No more fiddling with linkage parts. The
    Nylon is very light (often only 78 g/m 2 ). A special   breathability similar to cotton tents.  Only used for   tent is set up quickly and easily by inflating the air
    coating makes it even even more waterproof.   very high-quality tents.    tubes integrated in the tent skin.
    Nylon PU-coated (polyurethane coating)  Seam sealing - Seam Taping Tents made of   Tent components:
    Polyurethane coats the fiber and prevents water from   synthetic fiber fabric leak at seams first. To seal
    penetrating the fabric. Polyamide with aluminum   polyester tents, special, high-quality PU sealing tape  Guy ropes  Should have a light color so that they are
    coating improves the reflection of the sun's rays.   is pressed onto the inside of the seams using heat   visible in the dark. Leashes with woven-in reflective
    Depending on the coating, the water column ranges   and pressure. This makes them completely water-  strips that reflect light in the dark like a cat's eyes are
    from 400 to 10,000 mm. Disadvantage: Nylon   repellent. In the event of damage, liquid seam   ideal.
    material contracts strongly in the sun. The durability   sealants can be used for sealing. Seam sealing is   Zipper covers Hardly any zipper is waterproof. They
    against ultraviolet radiation (sun) is not very good. The   not so critical with nylon tents (usually double roof   should therefore be covered with a fabric flap that
    material stretches in the rain or cold.  tents). They are sewn with polyester threads with a   can be secured with Velcro.
                                         cotton coating that swells and seals.  With cotton
    Nylon Ripstop Nylon fabric with woven   tents, seam itself usually swells.  Tent windows Windows with mosquito netting
    reinforcements. More stable, significantly more tear-                     provide good ventilation, but must be closed in the
    resistant & more expensive. The material expands   Flame retardancy Tent fabrics are naturally   rain if the cover cannot be stretched over them for
    considerably less with temperature fluctuations. It is   sensitive to fire. They can be given a flame-retardant   protection. Screens over the windows protect the
    wafer-thin and very stable.          coating to improve their properties.  rolled-up cover from dirt and water. Curtains in front
    Polyester UV-resistant Extremely stable and hardly   Condensation water tightness Modern fabrics are  of the large transparent windows protect your
    any wear. Long shelf life. Comparatively resistant to   usually extremely waterproof. As a result, the   privacy. Choose between tents with tinted or clear
    solar radiation. Low water absorption, moisture   moisture in the breathing air or room air condenses   windows.
    remains on surface of material & hardly penetrates   on the interior walls. The only remedy is good   Set-up bars
    fibers. Very fast drying.            ventilation. The following rule applies: the greater the   Most tents are supplied with additional poles. These
                                         temperature difference between outside and inside,
    Polyester PU-coated (coated) Even more water-  the more ventilation is required. The effect can also   allow the front or side doors to be set up as
    repellent and quick-drying.          be reduced by using a thermal canopy made of   awnings.
    Polyester w/ silicone coating Water beads off   cotton fabric, which can store moisture and
    even more & does not penetrate the fabric at all.  therefore has a balancing effect.
    Polyester Ripstop Polyester fabric w/ reinforced
    "grid inserts", particularly tear-resistant. Oxford
    polyester, e.g. 150D. Woven polyester fibers are
    more stable and tear-resistant. Used for extremely
    high-quality tents. Reimo tents are mainly made of
    ripstop polyester or Oxford polyester. For long
    durability with low weight
                                                                                 Quality is the sum of
                                                                                       good details











      High ventilation            Aluminum frame              Thermal roof                  Carbon rods



    28         TENTS FOR CARAVANS
   33   34   35   36   37   38   39   40   41   42   43