Page 30 - REIMO 2024 EN

INFO

How do I measure the For caravans with an extremely sloping front
circumference end, you must measure perpendicular to the
ground from a height of approx. 185 cm (i.e.
If you do not know the overall dims. of your cara- you no longer follow the rail).
van, you have 3 options for determining them: This determined value is circulation dimension.
• Look in the brochure or in the technical data Points A and B are also the guy points of your
supplied w/ your caravan awning.
• Contact your caravan manufacturer and enquire If the overall dimensions of your caravan are on
about your overall dimensions, stating model the edge of the awning size specifications, you
and YOC. should opt for the smaller tent size. The size
of your caravan awning depends solely on the
• Measure yourself - the safest method. Caravan overall dimensions. Only the depth of the tent is A B
should be positioned horizontally on a level a free choice.
surface in order to measure overall dimensions
of your caravan. You measure from guy point Attaching the roof poles to the caravan.
A (floor) through the keder strip of the caravan • With wall eyelets, firmly screwed (seal drill holes
with a non-stretchable cord to guy point B well)! We recommend this option for partial
(floor). If the keder rail still has an inward curve tents. The rear roof corners are fixed and do not
at the lower end, you must measure perpendicu- move even in strong crosswinds. Wall eyelets
lar to the floor or remove the cord from the rail are also a good choice for permanent camping. A Partial tents B
at the insertion point.
• With screwless Vario clips! These are pushed
onto the inner piping. The advantage of this vari-
ant is the flexibility in the choice of fixing points.
Clip is connected to tent roof and cannot fall
down if the pressure on the poles decreases.

Important for aerodynamic caravans:

20 TENTS FOR CARAVANS